Handmade to order in BritainShips in 5–7 days
Handmade in Britain
A turned wooden ceiling rose, black twisted fabric flex and a knurled bulb holder — pick the wood and the metal.
£50.00
Made to order · ships in 5–7 daysA pendant built from four parts and nothing else: a ceiling rose turned from solid timber so the grain still reads, a length of black twisted fabric flex, a knurled bulb holder and the bulb of your choosing.
Choose the wood — natural oak, pale beech or dark walnut — and the metal independently. Brass on oak is the warm, traditional version; chrome on walnut is the one that looks like it came out of a workshop rather than a catalogue.
Each is assembled to order in Britain and supplied ready for an electrician to wire. Takes any E27 bulb; the clear globe filament shown suits it best and is not included.
Supplied ready to wire, for indoor use in dry locations. Installation should be carried out by a qualified electrician.
No — it takes any standard E27 screw-fit bulb, so you can pick the brightness and warmth you want. A large clear globe filament is what's shown in the photographs and what suits it best.
Yes, and plenty of people do. The arm and the bulb holder are chosen separately, so brass on copper or copper on black are both yours to have. Matching them gives you the quieter, more traditional version.
The metalwork will. The wood won't, quite — every back plate is turned from solid timber, so the grain and the figure are different on each one. That's the part most people end up liking most.
Nothing sits in a warehouse, so your light gets built when you order it. That takes 5–7 working days, then it goes out tracked by Royal Mail or a tracked courier.
Yes. You have 14 days from delivery to tell me you're cancelling and another 14 to get it back to me, and that applies even though it was made to order.
It's what most of them become. One either side of the bed, arm angled down, puts the light on the page rather than the ceiling — and frees the bedside table. Fit the plate roughly at shoulder height when you're sitting up in bed, usually 1.2–1.4 m from the floor; the arm reaches out 28 cm. More on bedside wall lights
Near enough. Swan neck and gooseneck both describe the curved arm; sconce is just the older word for any light fixed to a wall. Search for any of the three and you'll find the same family of lights — this is the one with the turned wooden plate.
It's supplied ready to wire, but it's a mains fitting — so unless you're competent to do it yourself, installation should be carried out by a qualified electrician.
Something not answered here? Ask me — it’s me who reads it and me who builds the light.
Choose the finish
Every combination has its own page, its own photographs and its own price — so you can send someone a link to the exact one you mean.
